HNYT Ships SSE335S-8 Air Compressors and ML33 Pneumatic Picks to Africa

On October 27, 2026, HNYT shipped SSE335S-8 air compressors and ML33 pneumatic picks to Africa. The order brings together compressed-air equipment and handheld pneumatic tools, with accessories packed for transport. Workshop and loading photographs record the compressor units, the protected pick and the cargo inside the shipping container.

For buyers planning pneumatic breaking and chipping work, the air supply is part of the equipment selection. The compressor supplies compressed air, while the pick uses that air to drive its impact mechanism. Sourcing both through one order allows the air supply, tool requirements and supporting accessories to be considered together.

Compressed air supply and pneumatic tools

The supplied technical sheet identifies the SSE335S-8 as an electrically driven stationary screw air compressor. Its rated air delivery is 9.8 m³/min and its rated discharge pressure is 0.8 MPa, equivalent to 8 bar. It uses single-stage compression, a coupling drive and air cooling. These specifications describe the compressor; they are not the operating settings of the ML33 pick.

The ML33 is a handheld pneumatic pick for breaking and chipping work. The packing photograph shows its green handle and body protected by a plastic bag and a shaped foam insert, with the accompanying components placed in separate recesses. This keeps the tool and loose items separated within the carton during handling.

For a similar installation, selection should start with the tool’s specified working pressure and air consumption, together with the number of tools used at once. Hose length, pipe diameter and pressure loss also affect the supply reaching the tool. The compressor’s rated flow alone does not establish how many picks it can operate simultaneously.

Packing and container loading for Africa

The shipment photographs show protective packaging at several scales: a fitted foam insert for the pick, wrapped and strapped cartons on a pallet, and compressor accessories packed in a wooden case. The container views show larger wrapped cargo positioned inside and a protected compressor near the container opening.

Together, these images document preparation and loading for the Africa shipment. They also give buyers a practical view of how the main equipment and smaller components are packed for overseas delivery.

Request a compressor and pneumatic pick quotation

Contact HNYT with the required quantities, destination, material to be worked, number of tools used simultaneously and available electrical supply. Include the required tool pressure and air consumption, plus the planned hose length, so we can review the compressor, pick and accessory requirements and prepare a quotation.