mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch
mining hoist winch

JZ-16/1500P sinking winch supplier

Mining hoist winch Applicable scenarios:Inclined shaft material transportation (such as coal, gangue), vertical shaft personnel lifting (explosion-proof model JTPB series must be selected);Suspending hoisting plates, water pumps and other equipment during vertical shaft excavation (load ≤ 160kN)

Maximum static tension of wire rope (kN)：160

Roll diameter (mm)：1000

Wire rope diameter (mm)：40

Winch weight (t)：16

Send a Email
Send a quote

Technical Features:

The JZ-type mine winder adopts controlling the Spindle device: The drum is connected to the gear and brake wheel via copper sleeves and bolts, the spindle only rotates synchronously with the drum without transmitting torque; the wire rope is designed with top-out routing, made of high-strength steel, and the rope capacity can reach 1,800 meters (e.g., JZ-40/1800). Braking system: The working brake adopts a pad brake structure, with the hydraulic pusher releasing when the motor starts and spring braking activated when the machine stops; the safety brake is of floating pad type, which triggers power-off protection by the fall of the heavy hammer to ensure the reliability of emergency braking.

 

Advanced Functions

Ultimate Load Capacity

Engineered for a maximum static tension of 130 kN—the highest specification in its class for deep mining applications.

Precise Speed Control

Multiple speed selections (1–5.8 m/s) with smooth transitions for optimal material handling.

Industrial Safety System

Triple redundant braking, emergency stop protocols, and real-time load monitoring.

Intelligent Diagnostics

IoT-enabled sensors deliver real-time performance data and predictive maintenance alerts.

Excellent Engineering Technology

The reinforced main shaft assembly, manufactured from high-strength alloy steel, withstands extreme operational stresses at depths exceeding 1,700 meters. Precision components include industrial-grade bearings, wear-resistant bushings and military-grade bolt sets. The 37 mm steel wire rope delivers exceptional durability and load distribution for the most demanding applications.

Drum capacity rope：1500m

Roll diameter ：1000mm

Wire rope diameter ：40mm

Winch weight ：16t

Mine Hoist Winch Component Details

Technical Specifications

ModelMaximum static
tension of wire rope
(kN)		Rated working
pressure of
hydraulic system
(MPa)		Speed
ratio of
reducer		Drum capacity
rope(m)		Roll diameter
(mm)		First layer
wire rope
speed
(m/s)		Wire rope diameter
(mm)		Winch weight
(t)
fastSlowfastSlow
JZ-16/1500P16012761521500 10000.0750.044016

Working Principle Diagram

Spindle Device of Single-Rope Drum Hoist
The spindle device, the hoist’s core load-bearing/working mechanism, bears all torque, winds steel wire ropes and resists static, dynamic and special loads. It comprises a 45# carbon steel spindle (two non-destructive tests), domestic HRB/ZWZ/LYC bearings, drums, liners and high-strength bolts; no extra keyways guarantee strength and safety.
 
Drums are 16Mn low-carbon alloy steel-welded (diffused deformation, non-concentrated stress), with post-welding aging vibration to eliminate internal stress. 16Mn brake discs resist deformation/wear; split types (factory-finished) are ready for on-site installation.
 
Double-drum hoists use radial gear block hydraulic rope adjustment (console-controlled); hydraulic clutches enable fast, reliable adjustment via spindle/movable drum rotation.
 
Three drum structures: 1. Integral (drum + brake disc welded); 2. Integral (two-piece split brake disc bolted); 3. Split (two/four-piece drum + two-piece brake disc bolted).
Spindle Device of Multi-Rope Drum Hoist
The spindle device, the hoist’s working mechanism, bears all lifting/lowering torque and steel wire rope tension on both sides of the friction wheel. It comprises a high-quality low-alloy steel spindle (bears self-weight, external loads and transmits torque, with forged flanges bolted to the friction wheel), friction wheel, rolling bearings, bearing blocks, covers, beams, friction liners, fixing and pressure blocks. The integral low-alloy steel welded friction wheel has a shell, webs, hubs, support rings and rope guards; large hoists (diameter ≥2.8m) have internal support rings for rigidity. Brake discs are welded (drum-end) or detachable split (bolt-connected) as needed. Main bearings are HRB/ZWZ/LYC double-row spherical roller bearings (good alignment, high load-bearing, impact-resistant, long-life, easy maintenance). Friction liners (friction coefficient ≥0.25) are bolt-fixed; floor-mounted hoist liners have two rope grooves, with a shifting device to double life and utilization.

Site video

Factory status

Hoisting Winch Factory
Hoisting Winch Factory
Hoisting Winch Factory
Hoisting Winch Factory
Hoisting Winch Factory

Live broadcast

Hoisting Winch Site
Hoisting Winch Site
Hoisting Winch Site
Hoisting Winch Site
Hoisting Winch Site
Hoisting Winch Site

FAQ

1.What are the types of mines? (Gold mines, coal mines, iron ore mines, others, etc.) Or for use in other industries?

2.What is the mine shaft type? Vertical shaft or inclined shaft? If inclined, what is its inclination angle?

3.Hoisting height of vertical shaft or inclined length of inclined shaft for haulage? / Roadway width × height

4.Shaft dimensions? (Diameter or length and width) / Inclined haulage length?

5.Maximum hoisting weight per single lift? Gross weight or net weight (total weight of hoisted ore, weight of the container)

6.Hoisting personnel or materials? (Personnel, materials, equipment)

7.Local voltage, frequency or pre-selected motor power? (Hz)

8.Required rope capacity

9.Electrical control system? AC or other types? Variable frequency control is recommended.

10.Operating hours per day? (Hours/day, Days/month, Months/year)

11.Number of drums? Single drum or double drum? (Single skip hoisting or double skip hoisting)

12.Do you have a specific selected equipment model?

13.Selection of hoisting conveyance? Cage, skip, bucket or other types?

14.Required maximum hoisting speed

15.Planned annual output or daily output?

 

  • Contact us now for more details!